Beds for baby dolls – This building of the 18-inch doll bed will be two end boards. Also two horizontal boards-one bed base and the other for a lower shelf- and two horizontal side boards closing in the bed base for the 18-inch doll bed. Starting with cut 18 inches long of 10 to 12 inches wide-bed base and lower shelf. The width will give the bed extra room for doll. Cut the side panels to the width of 18-inch doll bed base pieces, 10 to 12 inches wide. The height or length of the side panels can vary around 2 feet or more.
Depending on what decorative subjects you want to cut in the side panels. Then, cut out two 19- or 19 1/4-of-5-inch sidewall pieces from plywood. The extra inch or inches and a half are overlapped on two side panels at both ends for support. Sand all six pieces smoothly and seal the bed base and shelf. Sketch decorative design on one of the two side panels. And then place the other panel underneath it and squeeze together. Cut the design out through two pieces of plywood-this will make both ends of the 18-inch beds for baby dolls the same.
24 Photos Gallery of: Building Plans for 18 Inch Beds for Baby Dolls
Use the router equipped with your favorite decorative piece to complete the sides and top edges of the side panels. The top edges of the sidewall pieces and two along the sides of the lower shelf. Sand over the router edges for extra smoothness. Assembly: mark the position of the bed base and lower base on each side panel. Drill two pilot holes. Use a generous amount of wood and screw the pieces into place. Three glue and screw on two side walls both along the sides of the bed base and two side panels at both ends of beds for baby dolls.